TurboSkin compression fittings for multilayer pipe

Download

TurboSkin equal tee compression fitting brass
  • A range of brass fittings from 14 to 32 mm in diameter
  • An EPDM O-ring gives perfect water tightness
  • These fittings are made of high-quality CW617N brass.

1 EPDM O-ring
2 The COMAP 'A' mark: a quality guarantee
3 High-quality CW617N nickel-plated brass

TurboSkin compression fitting benefits

  • Versatile TurboSkin compression fittings can be used in drinking water installations, heating, chilled water, underfloor heating and sanitary systems.
  • This wide product range fits into most hydraulic network configurations.
  • Implementation with TurboSkin compression fittings is quick and easy. Two open-end spanners are all you need.

TurboSkin compression fitting applications

TurboSkin compression fittings have been designed for the following applications:

Drinking water
Sanitary hot water
Hot water networks
Under-floor heating and cooling
Chilled water
Solar heating
District heating
Water vapour
Rainwater
Process water
Dry compressed air (oil < 25mg/m3)
Lubricated compressed air (oil > 25mg/m3)
Vacuum
Gas

 

Compatible applications (stay within temperature and pressure limits)

Incompatible applications

For more details on the temperature and pressure conditions needed for these applications, please refer to the data sheet for this range.

TurboSKIN compression fittings are detachable and cannot be embedded.
They may be used in renovation and new installations.
 
TurboSKIN compression fittings must be used only with BetaSKIN or MultiSKIN multilayer pipes by COMAP.